![]() Configuration Example:ĪSA(config)# snmp-server host inside 10.1.1. ![]() It is recommended to leave all traps enabled as the default setting. The default configuration has all snmp traps enabled ( snmp-server enable traps snmp authentication linkup linkdown coldstart). This article is to assist users unfamiliar with the Cisco ASA 5505 running software version 7.2 in getting their device up and running to the point where they can register their. ![]() Step4: Enable the ASA to send snmp traps to the NMSĪSA(config)# snmp-server enable traps ] In the policy-map globalpolicy go into the class inspection-default section and add no inspect sip to remove it from the config then write the config to memory. “community string” is like a preshared password which must be configured on both the ASA and the NMS in order for the two elements to communicate.ĪSA(config)# snmp-server community Where “interface name” is the ASA interface through which the NMS can be reached, and “ip address” is the NMS address. ![]() Step2: Identify the NMS host that can connect to the ASA for SNMP managementĪSA(config)# snmp-server host community ![]()
0 Comments
Leave a Reply. |